- Availability: In Stock
- Product overview
- Addition
- Questions (0)
- Reviews (1)
CHARACTERISTICS
Sensor operation mode: motion detection of objects emitting IR radiation
Supply voltage: 110-240 V;
Power: 3W;
Recommended load: up to 40 W
Detection area: 110 degrees;
Operating time since last detection: about 20 seconds
Sensing distance: 3-6 meters (room temperature will affect the sensitivity of the sensor)
Shutdown in the presence of light: in the presence of light, the sensor does not supply power to the output
Working temperature: -20 to +40 degrees Celsius;
Protection against moisture and dust: IP22;
Hole Size: 20mm
Connectable: LED lighting via module, ceiling lights, panel lights, spotlights, incandescent bulbs and more
Note:
- When installing, please turn off the power to ensure safety
- Do not use the sensor for conditions exceeding the maximum values of load current or voltage
- Do not install the sensor in places where there is exposure to high humidity and water.
- The detection distance will change according to the ambient temperature, in summer the detection distance will be shorter than in winter
- Do not operate the sensor at temperatures below -20 Celsius or higher than 40 Celsius
- Do not expose the sensor to direct sunlight
- Do not install the sensor in places where there are moving objects
- When first turned on, the sensor will turn on the load for about one minute - this is a normal phenomenon.
No questions about this product, be the first and ask your question.
Universal remote infrared motion sensor 220V: application and benefits
Remote infrared motion sensor 220V is a device that is used to detect the movement of objects in the room. It can be used for both home use and commercial and industrial purposes.
Application
Remote infrared motion sensor 220V can be used to control the lighting in the room. It can automatically turn on the light when an object's movement is detected and turn it off after a certain time after the object has left the sensor's coverage area. This device can be used to illuminate corridors, stairs, basements, garages, warehouses and other areas.
In addition, the remote infrared motion sensor 220V can be used for home or office security. It can automatically signal the intrusion into the premises by sending a message to a mobile phone or other device, combining it with other devices. This device can also be used to control access to the premises and more.
Advantages
One of the main advantages of the remote infrared motion sensor 220V is its versatility. It can be used for both home use and commercial and industrial purposes. In addition, it is easy to install and configure, allowing you to quickly integrate it into any system.
Another advantage of the remote infrared motion sensor 220V is its accuracy. It detects the movement of objects in the room with high accuracy and allows you to automatically control lighting and security. This makes it ideal for indoor use where it is important to respond quickly to changes in the environment.
Remote infrared motion sensor 220V with such characteristics can be effectively used in a wide range of tasks related to automatic control of light and other electrical devices. In addition, the 220V remote infrared motion sensor has low power consumption, which reduces energy costs. It can be easily installed and configured, and the presence of a time delay function can reduce power consumption and save resources.
При попытке подключить старый светильник с лампами дневного света, которые, моргая, долго разжигаются через стартер и дроссель, ничего не получилось, как и предполагалось. Датчик пытается включить, свет моргает, потом гаснет, потом снова моргает.
Короче, современное решение для современных ламп.